| Measured section | Data file (Tecplot Ascii) | Tecplot layout file | Exported figure files |
|---|---|---|---|
| Case 1.3a | |||
| S2 (SS 3/8) |
S2-woDuct-woProp.dat JBC-SS0.375.dat |
S2-woDuct-woProp.lay |
[Identifier]_S2-woDuct-woProp_U_1-3a.png [Identifier]_S2-woDuct-woProp_V_1-3a.png [Identifier]_S2-woDuct-woProp_W_1-3a.png [Identifier]_S2-woDuct-woProp_VW_1-3a.png |
| S4 (between duct and propeller) |
S4-woDuct-woProp.dat | S4-woDuct-woProp.lay |
[Identifier]_S4-woDuct-woProp_U_1-3a.png [Identifier]_S4-woDuct-woProp_V_1-3a.png [Identifier]_S4-woDuct-woProp_W_1-3a.png [Identifier]_S4-woDuct-woProp_VW_1-3a.png |
| S7 (AP) |
S7-woDuct-woProp.dat | S7-woDuct-woProp.lay |
[Identifier]_S7-woDuct-woProp_U_1-3a.png [Identifier]_S7-woDuct-woProp_V_1-3a.png [Identifier]_S7-woDuct-woProp_W_1-3a.png [Identifier]_S7-woDuct-woProp_VW_1-3a.png |
| Case 1.4a | |||
| S2 (SS 3/8) |
S2-wDuct-woProp.dat JBC-SS0.375.dat |
S2-wDuct-woProp.lay |
[Identifier]_S2-wDuct-woProp_U_1-4a.png [Identifier]_S2-wDuct-woProp_V_1-4a.png [Identifier]_S2-wDuct-woProp_W_1-4a.png [Identifier]_S2-wDuct-woProp_VW_1-4a.png |
| S4 (between duct and propeller) |
S4-wDuct-woProp.dat | S4-wDuct-woProp.lay |
[Identifier]_S4-wDuct-woProp_U_1-4a.png [Identifier]_S4-wDuct-woProp_V_1-4a.png [Identifier]_S4-wDuct-woProp_W_1-4a.png [Identifier]_S4-wDuct-woProp_VW_1-4a.png |
| S7 (AP) |
S7-wDuct-woProp.dat | S7-wDuct-woProp.lay |
[Identifier]_S7-wDuct-woProp_U_1-4a.png [Identifier]_S7-wDuct-woProp_V_1-4a.png [Identifier]_S7-wDuct-woProp_W_1-4a.png [Identifier]_S7-wDuct-woProp_VW_1-4a.png |
| Case 1.7a | |||
| S2 (SS 3/8) |
S2-woDuct-wPropR.dat S2-woDuct-wPropL.dat JBC-SS0.375.dat |
S2-woDuct-wProp.lay |
[Identifier]_S2-woDuct-wProp_U_1-7a.png [Identifier]_S2-woDuct-wProp_V_1-7a.png [Identifier]_S2-woDuct-wProp_W_1-7a.png [Identifier]_S2-woDuct-wProp_VW_1-7a.png |
| S4 (between duct and propeller) |
S4-woDuct-wPropR000.dat S4-woDuct-wPropL000.dat |
S4-woDuct-wProp000.lay |
[Identifier]_S4-woDuct-wProp000_U_1-7a.png [Identifier]_S4-woDuct-wProp000_V_1-7a.png [Identifier]_S4-woDuct-wProp000_W_1-7a.png [Identifier]_S4-woDuct-wProp000_VW_1-7a.png |
| S4-woDuct-wPropR024.dat S4-woDuct-wPropL024.dat |
S4-woDuct-wProp024.lay |
[Identifier]_S4-woDuct-wProp024_U_1-7a.png [Identifier]_S4-woDuct-wProp024_V_1-7a.png [Identifier]_S4-woDuct-wProp024_W_1-7a.png [Identifier]_S4-woDuct-wProp024_VW_1-7a.png |
|
| S4-woDuct-wPropR048.dat S4-woDuct-wPropL048.dat |
S4-woDuct-wProp048.lay |
[Identifier]_S4-woDuct-wProp048_U_1-7a.png [Identifier]_S4-woDuct-wProp048_V_1-7a.png [Identifier]_S4-woDuct-wProp048_W_1-7a.png [Identifier]_S4-woDuct-wProp048_VW_1-7a.png |
|
| S7 (AP) |
S7-woDuct-wPropR000.dat S7-woDuct-wPropL000.dat |
S7-woDuct-wProp000.lay |
[Identifier]_S7-woDuct-wProp000_U_1-7a.png [Identifier]_S7-woDuct-wProp000_V_1-7a.png [Identifier]_S7-woDuct-wProp000_W_1-7a.png [Identifier]_S7-woDuct-wProp000_VW_1-7a.png |
| S7-woDuct-wPropR024.dat S7-woDuct-wPropL024.dat |
S7-woDuct-wProp024.lay |
[Identifier]_S7-woDuct-wProp024_U_1-7a.png [Identifier]_S7-woDuct-wProp024_V_1-7a.png [Identifier]_S7-woDuct-wProp024_W_1-7a.png [Identifier]_S7-woDuct-wProp024_VW_1-7a.png |
|
| S7-woDuct-wPropR048.dat S7-woDuct-wPropL048.dat |
S7-woDuct-wProp048.lay |
[Identifier]_S7-woDuct-wProp048_U_1-7a.png [Identifier]_S7-woDuct-wProp048_V_1-7a.png [Identifier]_S7-woDuct-wProp048_W_1-7a.png [Identifier]_S7-woDuct-wProp048_VW_1-7a.png |
|
| S7-woDuct-wPropRmean.dat | S7-woDuct-wPropmean.lay |
[Identifier]_S7-woDuct-wPropmean_U_1-7a.png [Identifier]_S7-woDuct-wPropmean_V_1-7a.png [Identifier]_S7-woDuct-wPropmean_W_1-7a.png [Identifier]_S7-woDuct-wPropmean_VW_1-7a.png |
|
| Case 1.8a | |||
| S2 (SS 3/8) |
S2-wDuct-wPropR.dat S2-wDuct-wPropL.dat JBC-SS0.375.dat |
S2-wDuct-wProp.lay |
[Identifier]_S2-wDuct-wProp_U_1-8a.png [Identifier]_S2-wDuct-wProp_V_1-8a.png [Identifier]_S2-wDuct-wProp_W_1-8a.png [Identifier]_S2-wDuct-wProp_VW_1-8a.png |
| S4 (between duct and propeller) |
S4-wDuct-wPropR000.dat S4-wDuct-wPropL000.dat |
S4-wDuct-wProp000.lay |
[Identifier]_S4-wDuct-wProp000_U_1-8a.png [Identifier]_S4-wDuct-wProp000_V_1-8a.png [Identifier]_S4-wDuct-wProp000_W_1-8a.png [Identifier]_S4-wDuct-wProp000_VW_1-8a.png |
| S4-wDuct-wPropR024.dat S4-wDuct-wPropL024.dat |
S4-wDuct-wProp024.lay |
[Identifier]_S4-wDuct-wProp024_U_1-8a.png [Identifier]_S4-wDuct-wProp024_V_1-8a.png [Identifier]_S4-wDuct-wProp024_W_1-8a.png [Identifier]_S4-wDuct-wProp024_VW_1-8a.png |
|
| S4-wDuct-wPropR048.dat S4-wDuct-wPropL048.dat |
S4-wDuct-wProp048.lay |
[Identifier]_S4-wDuct-wProp048_U_1-8a.png [Identifier]_S4-wDuct-wProp048_V_1-8a.png [Identifier]_S4-wDuct-wProp048_W_1-8a.png [Identifier]_S4-wDuct-wProp048_VW_1-8a.png |
|
| S7 (AP) |
S7-wDuct-wPropR000.dat S7-wDuct-wPropL000.dat |
S7-wDuct-wProp000.lay |
[Identifier]_S7-wDuct-wProp000_U_1-8a.png [Identifier]_S7-wDuct-wProp000_V_1-8a.png [Identifier]_S7-wDuct-wProp000_W_1-8a.png [Identifier]_S7-wDuct-wProp000_VW_1-8a.png |
| S7-wDuct-wPropR024.dat S7-wDuct-wPropL024.dat |
S7-wDuct-wProp024.lay |
[Identifier]_S7-wDuct-wProp024_U_1-8a.png [Identifier]_S7-wDuct-wProp024_V_1-8a.png [Identifier]_S7-wDuct-wProp024_W_1-8a.png [Identifier]_S7-wDuct-wProp024_VW_1-8a.png |
|
| S7-wDuct-wPropR048.dat S7-wDuct-wPropL048.dat |
S7-wDuct-wProp048.lay |
[Identifier]_S7-wDuct-wProp048_U_1-8a.png [Identifier]_S7-wDuct-wProp048_V_1-8a.png [Identifier]_S7-wDuct-wProp048_W_1-8a.png [Identifier]_S7-wDuct-wProp048_VW_1-8a.png |
|
| S7-wDuct-wPropRmean.dat | S7-wDuct-wPropmean.lay |
[Identifier]_S7-wDuct-wPropmean_U_1-8a.png [Identifier]_S7-wDuct-wPropmean_V_1-8a.png [Identifier]_S7-wDuct-wPropmean_W_1-8a.png [Identifier]_S7-wDuct-wPropmean_VW_1-8a.png |
|
Files for exporting figures. Please modify and use if necessary.
| File name | Remarks |
|---|---|
| Export.mcr | Tecplot macro to export 4 figures(U,V,W contours and cross flow vectors) |
| Batch4Export.bat | Windows batch file to execute Export.mcr for each layout files |
There are 8 variables in each data files.
| Variable name | Remarks |
|---|---|
| Y | \( = Y / L_{PP} \) |
| Z | \( = Z / L_{PP} \) |
| U | \( = u / U \) |
| V | \( = v / U \) |
| W | \( = w / U \) |
| VWAMP | \( = \sqrt{U^2+V^2} \) Points at which \( 0.75 \lt VWAMP \) are blanked in every figures. |
| YB |
\( = -Y \): for data with anti-clockwisely rotating propeller \( = Y \): for other data Varaiable for blanking an unnecessary side. The region \( 0 \lt YB \) is blanked in every figures. |
| RNC |
\( = N_c / N_m \) \( N_c \): Number of samples used for averaging \( N_m \): Number of measured samples Velocities were calculated by averaging measured samples for each points. But some (\(N_m - N_c\)) samples were not used due to optical problem. Points at which \( RNC \le 0.2 \) are blanked in every figures. |